Puzzle Interlocking Rubber Gym Flooring Tile

Subfloor

• The surface must be smooth, level (levelled) and clean/dry.

Preparation

• We recommend leaving the puzzles at room temperature for a few hours (ideally 24) before final laying and cutting to allow the surface to acclimatise.
• Underfloor heating must be turned off 24 hours before installation and must only be turned back on after the adhesive has cured.

Glue To The Subfloor

• For complete surface adhesion and minimal visibility of the seams, we recommend gluing the rubber to the substrate. In this case, the glue manufacturer‘s specific adhesive recommendations should be followed. 

Specifications:

• BULK DENSITY Approx. 980 kg/m3
• ULTIMATE TENSILE STRENGTH > 1.8 N/mm2 | Elongation at break: 118 % EN 12230
• COMPRESSION 10 mm: 9 % DVR with a compression of 25 % ISO 815 MAX.
• COMPRESSION AT 5N/mm2 12mm: 2.32 mm without visible damage
• EMPA SHOCK ABSORPTION 6 mm: 15,7 % 8 mm: 17,4 % 10 mm: 18,5 % EN 14904
• TEMPERATURE STABILITY 30° C to +80° C (in resting condition -120° C and for short periods up to +300° C)
• DIMENSIONAL CHANGE AFTER HEAT EXPOSURE PURE BLACK Longitudinal 0.15% Across 0.0 % Warping 0 mm EN 434
• THERMAL CONDUCTIVITY 0.17 W/(mK) EN 12230
• FIRE BEHAVIOUR EF1 – S2 EN 13501
• SOUND IMPROVEMENT 6 mm: 17 dB 8 mm: 18 dB EN ISO 10140
• ANTI-SLIP PROPERTY Class R 10 DIN 51130 Class DS EN 14041
• DYNAMIC COEFFICIENT OF FRICTION µ 0.57 EN 13893
• ELECTRICAL PROPERTIES -0.7 kV (antistatic) EN 1815 STATIC STIFFNESS at a maximum load of 8 kN (evaluation)*
• DYNAMIC STIFFNESS at average loads from 0.4 to 4 kN and frequencies from 5 to 40 Hz (evaluation)*
• VAPOUR DIFFUSION Vapour permeable
• CHEMICAL BEHAVIOUR Resistant to water, numerous diluted acids and alkaline solutions EN 423